Cable Gate Specifications
Mechanical Specifications
| Master and Passive Posts |
| Material |
Posts: 250 x 150 x 5mm thick steel RHS |
| Base Plate |
350 x 350 x 12mm thick steel plate |
| Height |
840mm |
| Weight |
Master Post: 58 kg (including Main Operating Module and Batteries)
Passive Post: 38 kg (including Counterweight Arm) |
| Treatment |
Heavy zinc plated (inside and out) and powder coated
Colour: Standard - brilliant white. Optional - other colours from Colorbond® range |
| Main Cable |
| Material |
Grade 304 Stainless Steel, 7/19 Lay, 8mm diameter |
Operating Specifications
| Opening Time |
Approximately 0.5 second |
| Closing Time |
Approximately 7 seconds |
Installation Specifications
| Cable Span Range |
4.0 metres to 13.0 metres |
| Operating Temperature Range |
-10ºC to +50ºC |
| Post Anchoring |
Four 20mm x 260mm Chemical Anchor threaded rods with nuts and washers per post.
OR
One 20mm x 300mm square Bolt Cage Assembly (280mm centres) with nuts and washers per Post. |
Electrical Specifications
| Primary Power Source |
2 x 7Ah 12v rechargeable SLA Batteries |
| Battery Charging System |
Integrated into the Gate control system |
| Plug Pack |
24-Volt 1 amp AC Plug Pack |
| Solar Panel Charging |
20w to 160w depending on installation location and daily cycle rate. (Optional) |
Control System Specifications
| Access Control System Voltage |
12-Volts DC nominal |
| Access Control Max. Current Draw |
1 Amp |
| Maximum Electrical Cabling Distance |
200 metres |
| Optional Integrated Access Control |
Radio remote Key Fob |
Designed & Manufactured by
Access Technologies. Cable Gate is patent protected on a worldwide basis.
